Tools needed
- A small philips or cross head screwdriver
Step 1 - Remove the Hinge Screws
Step 2 - Remove the Three Small Black Screws
Remove the three black screws. Notice that the two screws attached to the hinge part are shorter than the single screw in the slip contact body.
Step 3 - Prepare the parts for assembly
You should have:
- New slip contact
- 2 small black screws
- 1 long black screw
- Hinge
- Metal bottom cover
Step 4 - Assemble the Battery Door
- Slide the slip contact into the battery cover
- Fit the long screw to point #3
- Fit the short screws to points #1 and #2
Step 5 - Attach the completed assembly to the mod
Align and close the battery door before fitting the hinge screws taking care that the spring clip shown below is inside the mod not trapped under the hinge.
Step 6 - Repair Complete